Pages: 1
Posted by: LT80
OMG>>.. You take an impact wrench and remove the front clutch.
Where ya getting a spring?
Posted by: LT80
Ok, this is normal. More pursuation is required BR>The plate in there sometimes gets squeezed on the crankshaft.
You need a repair manual No online micro-fiche that I know of.
I use suzuki rollers,thus I never cared about the size.
Posted by: HELIX
Ronnies.com has a micro fisc
Posted by: 450Rutmaker
How do you remove the front part of the clutch apart? Ihave the rear apart were the spring is and im gonna get a heavier spring but I need to remove 2 of the rollers and cant seem to find them..
HELPTextimg src="i/expressions/face-icon-small-blush.gif" border="0">img src="i/expressions/face-icon-small-happy.gif" border="0">img src="i/expressions/face-icon-small-happy.gif" border="0">img src="i/expressions/face-icon-small-blush.gif" border="0">
Posted by: 450Rutmaker
I used a impact and got the nut off but thats all that will come off. the clutch like slides 1/2 inch then stops. is there any place to get a diagram of this? Also what size are these rollers ?
Posted by: 450Rutmaker
First I was talking about the weight of the rollers.
Second I found a fiche and see whats all in there.
I got it off and took two out
LT80 I was going to shim out the spring if I cant get one from epi
