Yamaha Discussions about Yamaha ATVs.

YFZ450 won't start---doesn't crank, oil light comes on

Thread Tools
 
Search this Thread
 
  #1  
Old 12-08-2009, 03:56 PM
Alex Walsh's Avatar
Weekend Warrior
Thread Starter
Join Date: Dec 2009
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Exclamation YFZ450 won't start---doesn't crank, oil light comes on

I just got a 2005 YFZ 450 and it ran great for 2 rides. Then today i go to start it up. i turn the key and the neutral light comes on and i hit the starter button and nothing. only the oil light comes on when i hold the button in. Motor doesnt crank or click. someone please give me some tips as to what the problem is
 
  #2  
Old 12-08-2009, 06:58 PM
Terrellster's Avatar
Pro Rider
Join Date: Jan 2008
Posts: 448
Likes: 0
Received 0 Likes on 0 Posts
Default

Is it in Neutral?
 
  #3  
Old 12-08-2009, 07:21 PM
Alex Walsh's Avatar
Weekend Warrior
Thread Starter
Join Date: Dec 2009
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

yes, i even held in the clutch and tried changing gears and it wont come out of neutral and the light just stays on. i cant do anything to make it crank by itself. it is below freezing, so i wasnt sure if this may have been a cause
 
  #4  
Old 12-08-2009, 07:39 PM
dirtjunkie's Avatar
Range Rover
Join Date: Sep 2009
Location: Texas
Posts: 135
Likes: 0
Received 0 Likes on 0 Posts
Default

Check to make sure the battery is fully charged.
Make sure the kill switch is 'off'
Make sure it is in nuetral
 
  #5  
Old 12-08-2009, 09:07 PM
Alex Walsh's Avatar
Weekend Warrior
Thread Starter
Join Date: Dec 2009
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

battery is charged--it wont even do anything while its hooked up to the charger
kill switch is in 'run' position
in neutral--i can roll it

the only other thing i can think of is frozen or bad wiring. i did check some connections though and it seemed fine.
 
  #6  
Old 01-05-2010, 10:29 PM
450grl's Avatar
Trailblazer
Join Date: Jun 2008
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
Default

Can you push start it? If your wheels lock up when you let go of the clutch, you might have a seized motor.
 
  #7  
Old 01-06-2010, 07:30 PM
Alex Walsh's Avatar
Weekend Warrior
Thread Starter
Join Date: Dec 2009
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

yes, i got it push started. i took it to my friend who works on them and it turns out yamaha is known for having "a little red wire" that usually goes bad. im guessing its the starter button relay. he replaced it and now it runs perfect
 
  #8  
Old 03-06-2010, 04:42 PM
K F X STEVE480's Avatar
Weekend Warrior
Join Date: Mar 2008
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Default

spray some wd40 or some kind of cleaner in the key ignition slot, same thing happened to me
 
  #9  
Old 03-06-2010, 05:51 PM
Scooter86's Avatar
Extreme Pro Rider
Knows Old ATV Questions!
Join Date: Sep 2003
Posts: 5,127
Likes: 0
Received 3 Likes on 3 Posts
Default

Check the fuses on the starter relay. one is live and one is a spare so if you have a blown one they can be swapped. I had the wiring harness wear through and short out on the frame that caused a similar problem on my '05. The area that wore through was close to one of the sensors on the radiator.
 
  #10  
Old 05-20-2013, 10:32 AM
Lilgsxr's Avatar
Weekend Warrior
Join Date: May 2013
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Same problem here

Which wire did you replace and where is located?
I'm having the same problem

[QUOTE=Alex Walsh;2882243]yes, i got it push started. i took it to my friend who works on them and it turns out yamaha is known for having "a little red wire" that usually goes bad. im guessing its the starter button relay. he replaced it and now it runs perfect[/QUOTE
 


Quick Reply: YFZ450 won't start---doesn't crank, oil light comes on



All times are GMT -5. The time now is 12:15 AM.