We just switched a small trailer with some old 23"x8-11 Honda rims and tires we bought cheap. We put the nearly flush off set inside towards the trailer (Air stem inside not out). The Hub hole had to be filed larger buy only a 1/16th( was not hard) to fit over trailer hub.
The 4 stud holes did not line up so we used the slitted vent holes next to the stud holes instead with heavy large washers and tightened them down until the washers squished and formed into place. Worked out great.
Were thinking of tack welding the washers to the rims in the future. The 5 psi ATV tires keep the trailer from bouncing over the rough stuff but allows it to claw over smoothly instead.
You could also buy the correct bolt pattern hub for the ATV rim and put it on your trailer,they are cheap on e bay.
__________________
2001 Yellow SP 500
No ECM
No Plastic roller cage
5.25 gal tank.
Last edited by TLC; 04-06-2009 at 08:37 AM.
|