New 200cc Giovanni Beast
Locktite every bolt that doesn't have a lock nut, and flush the oil and install some Rotella T 15w40w or in cold climate 5w40w since Rotella T doesn't have the friction modifiers and is compatible with a wet clutch like your Gio 200cc, and of course 4-stroke oil works too but is more expensive.
For the spark plug a NGK D8EA OR DP8EA is a direct replacement for these motors. I would also change the brake fluid with some of better quality. Also make sure you take some measurements when aligning the front end during assembly so your wheels will be straight. You will also need to tweak the idle a little after the ATV is warmed up for proper idle. Once everything is together and the ATV has been started let it idle for about 15 minutes before trying to ride, and even then it needs to be broke in slowly. (not over revving the engine etc)
You will also have to fill the battery acid as they come shipped empty, so don't drink the liquid with a straw, thats your acid for the battery. You will also need to adjust the chain as they typically need to be tightened before riding and after it has had a chance to stretch.
Make sure to check the oil daily during the break in period as it will tend to use some getting every thing seated up right. After a week I would flush the oil again and install new once the ATV engine has been run some, then just enjoy your new Chinese ATV !!! ......................................Slydog
|