TiMing KeYs ??????????????
#1
TiMing KeYs ??????????????
I was talkin with these guys on the hill the other day and they said something about timming keys , sayin if i put a .50 timing key in mine it would get more power...what are they talkin aboot? are they advancing there timing . 5 degrese?i f someone could explain what this actually does and what r the pros and cons of it
thanks for the help
thanks for the help
#2
TiMing KeYs ??????????????
I sent you a PM. I am the one who had the keys made specifically for the Polaris twins, 600, 700, and 800. I had 0.040" keys (5 degrees advance) and 0.050" keys (6 degrees advance). I had 25 of each made and I just sold out. I will have a few more by the end of the week as I just ordered more from the machine shop.
All other keys online have to be ground to make them fit. The ones I had made fit perfectly on the Polaris twins with no grinding required. Mine also cost about 1/2 of what the others cost.
Anyway, advancing the timing on the twins does improve performance some and it is a cheap mod.
Please PM me if you are interested.
All other keys online have to be ground to make them fit. The ones I had made fit perfectly on the Polaris twins with no grinding required. Mine also cost about 1/2 of what the others cost.
Anyway, advancing the timing on the twins does improve performance some and it is a cheap mod.
Please PM me if you are interested.
#3
TiMing KeYs ??????????????
Generally, the more the timing is advanced, the better performance and fuel economy you will experience. Advancing the timing makes for an earlier spark, which allows for a more complete fuel burn.
Caution must be taken when advancing the timing. Timing that is too far advanced can result in preignition (pinging), which isn't good for the engine. Basically, you want the most timing advance short of pinging.
When I was tuning Harley Davidsons, I advanced the timing until the point where the engine would ping under a slight load, then retarded it one degree from there.
Good luck!
Caution must be taken when advancing the timing. Timing that is too far advanced can result in preignition (pinging), which isn't good for the engine. Basically, you want the most timing advance short of pinging.
When I was tuning Harley Davidsons, I advanced the timing until the point where the engine would ping under a slight load, then retarded it one degree from there.
Good luck!
#7