how to tighten chain on magnum 425
#14
#15
#16
how to tighten chain on magnum 425
That's correct, don't hit anything with a hammer.[img]i/expressions/face-icon-small-confused.gif[/img]
Like I stated earlier, keep trying, once you get those eccentric bolts loosened and the punch inserted you may need to give it a sharp/hard push to get the "hub" to spin inside the "eccentric clamp". That was my problem when I tried the first few times, I wasn't breaking the "hub" loose from the clamps around it. You'll notice when the hub spins, it's like a lightbulb going off[img]i/expressions/face-icon-small-happy.gif[/img]...ahh now the chain is tighter. It was bear for me as well, insert the punch and rock the bike back and forth pretty hard, it'll break loose. There's quite a bit of play to adjust the chain so I don't think you need a new chain, just have to get the hub to break loose from the eccentric "clamp". Then it should go.
Like I stated earlier, keep trying, once you get those eccentric bolts loosened and the punch inserted you may need to give it a sharp/hard push to get the "hub" to spin inside the "eccentric clamp". That was my problem when I tried the first few times, I wasn't breaking the "hub" loose from the clamps around it. You'll notice when the hub spins, it's like a lightbulb going off[img]i/expressions/face-icon-small-happy.gif[/img]...ahh now the chain is tighter. It was bear for me as well, insert the punch and rock the bike back and forth pretty hard, it'll break loose. There's quite a bit of play to adjust the chain so I don't think you need a new chain, just have to get the hub to break loose from the eccentric "clamp". Then it should go.
#17
how to tighten chain on magnum 425
well i know you said dont use a hammer but my motto has always been if all else fails then use a hammer... or a "BFH" as some would call it. anyways the hub would never break loose and turn so i did get out the hammer and i think i got the chain tight now. i know its at least tighter than it was. thanks to all for the help. im sure i'll have another question in the future lol!!
Thread
Thread Starter
Forum
Replies
Last Post
mrtidy
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
02-03-2016 05:00 PM
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
1
09-09-2015 06:57 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)