[mastrblastr]

I bought one of these quads for my daughter and if you don't have any metric wrenches, you better get some cause you are gonna need them. I adjusted the valves, set the toe-in, had to remount the fuel tank as the mounts were all crooked, had to tighten the front a-arms after 3 hours of use as they were really loose, had to tighten the exhaust, had to make new bushings for the rear swingarm, have had to retighten the rear hubs---twice, had to remove the safety lanyard switch as it was malfunctioning, had to replace a brakelight already, had to make some rubber pieces to mount the battery into as it was too loose in the factory mount, and I just noticed the rear swingarm mount area is worn badly on one side. I also noticed the front a-arm pivot areas are getting loose so I think I will be building new bushings for them as well. One thing after another with this thing. If my Kawie 650 had as many problems, I would have blown it up a long time ago!!