Stock Carb Mods - Summary
BigChief650,
Did you try the latest mod with the lid off?
It would be a better comparison to the TM45, since you will be running that carb with no lid.
If you do not want to spend the money for a new air jet here's an alternate.
Take out present air jet and solder the end that goes in first, not slotted end.
Most mechanics have a small drill set for cleaning out orifices on brakes.
Hand drill with a .022in drill bit, very slowly, so as not to break drill.
Thats what I did till I found the size that worked best.
|